background image

2

intROduCtiOn

The drivetrain consists of the parts of the bicycle that transmit power 

to the rear wheel:

• Pedals (and toe-clip assemblies on some models)
• Crankset and bottom bracket- left and right crank arms, 

chainring(s), and bottom bracket (the axle and bearings on which 
the crankset rotates) 
(Figure 1)

• Cassette and chain

When the drivetrain is 

working properly, shift-
ing is easy, your bike is 
quiet, and its efficiency can 
reach its maximum. Read 
and follow the sections 
that discuss the parts that 
comprise the drivetrain to 
make sure all the parts are 
working properly.

Carbon fiber composite

The Bontrager Race XXX 

Lite crankset is made from 
OCLV carbon fiber com-
posite. Carbon fiber is among the strongest materials used in bicycle 
manufacture. However, carbon fiber has unique qualities, different from 
metal parts, and must be inspected carefully for damage. Follow the 
inspection procedures in the Maintenance section.

Figure   Exploded diagram of Race XXX Lite crankset

WaRninG

a damaged carbon fiber part can fail suddenly, causing 

serious injury or death. inspect a carbon fiber bicycle or 

parts for damage frequently. if you suspect a carbon fiber 

part is damaged, immediately stop riding the bicycle. before 

riding, replace the part or take the bike to your dealer for 

service.

Introduction

Содержание Race XXX Lite Road Crankset














Отзывы: