BonsenKitchen CM8001, Руководство по эксплуатации

Страница: 7 / 16

TECHNICAL DETAILS
120V~ 60Hz 1350W
BEFORE USING COFFEE MAKER
To ensure the first cup of coffee tastes excellent, you should rinse the coffee
maker with warm water as follows:
1. Pour water into the water tank, the water level should not exceed the “MAX”
mark in the tank. Then close the water tank cover.
2. Set steel mesh into the metal funnel (no coffee in steel mesh).
3. Place an espresso cup (your cup) on drip plate. Make sure the coffee/steam
knob is on the “ ” position.
4. Connect to power source, press the ON/OFF switch. The red indicator will be
flashing.
5. The appliance begins to be pre-heated until the red indicator becomes soild,
it shows the pre-heating is finished. Turning the coffee/steam knob to the
“ ” position, and water will flow out.
6.
After about 30s, turn the coffee/steam knob to the “ ” position to stop
brewing, you can pour the water in a container out then clean them thoroughly,
now you can start brewing.
NOTE:
The appliance is supplied with a detachable tank for easy cleaning,
you can fill the tank with water firstly, and then put the tank into the appliance.
NOTE:
The appliance is not equipped with a jug, please use your jug or
coffee cup.
NOTE:
There may be noise when pumping the water for the first time, it is
normal, the appliance is releasing the air in the appliance. After about 20s, the
noise will disappear.
4