User Manual n°648261 –
Page 5
1.4 SIMPLIFIED GUIDE
with factory settings
POWER UP
Press on
)
Press for a few seconds.
PREFUNCTION CYCLE
Press on
)
To select the cycle
Press on to start the cycle.
A defrost cycle is launched and automatically followed
by a prefunction cycle.
LOADING
At the end of the prefunction cycle, introduce the products into the appliance.
For a core probe cycle, introduce the core probe deep inside the product.
CYCLE WITH PROBE (with use of the core probe)
Press on
)
and
or
and if necessary
)
or
To select the cycle in chilling or freezing mode.
Sound alarm and the indication SP is displayed if the
probe is not correctly used.
To modify the temperature of the set-point at the end of
the cycle.
CYCLE WITH TIMER (without using the core probe)
Press on
)
and
or
and if necessary
)
or
To select the cycle in chilling or freezing mode.
To modify the cycle duration
FRAGILE PRODUCTS
Press on
)
To limit air temperature of a blast chilling cycle,
avoiding frost deposit.
(Press for a few seconds during the cycle)
START
Press on
)
1) To start a cycle.
2) To stop a running cycle (press for a few seconds).
CYCLE EXECUTION
Led
Running cycle
Led
Preservation cycle (between 0 and +3°C or at -20°C)
STOP OF THE APPLIANCE
Press on
)
Press for a few seconds.
It is recommended to let the door half-open when the
appliance is not used.
