２
4. Notes for installation and use
・
This machine is designed with earth specification. For safety, be sure to use an earth-quipped receptacle.
(If you do not have such receptacle, install an earth separately.)
・
For surrounding conditions, use this machine on a neat work bench on which a conductive mat is put.
・
Refrain from place where the machine would be exposed too much moisture, direct sunshine, much dust and
vibration.
・
In order to prevent static electricity, it is recommended using a static electricity removal device, wrist strap etc.
・
Odor is generated due to the use of solder and flux. Be sure to ventilate work places.
(E.g. fitting of ventilator etc.)
・
Be sure to pull out the power plug, when the machine is not used.
・
Be sure to grab the power plug instead of cable, when inserting and pulling out the plug.
・
If the power voltage is changed from 100V to 220V, make sure of confirm the specifications of the soldering iron
unit before the change.
・
If flammable objects are placed near this machine, there is a danger of fire. Be careful.
・
Be sure to check the slack of each screw before use. If the screw is loosen, tight it.
・
Do not use this machine for purpose other than the original purpose.
