Operation
1. Before start the machine, check carefully whether the fasteners on the
machine are loose or not because of transportation. If yesterday, must be
re-tightened.
2. Fix the tire on the tire spreader with claw by hand
3. According to the size of tire which need be repaired to adjust the
spreading claw to be the appropriate height. Place the spreading hook to be
link pin of the hanging device. Adjust the spreading hook, move the link pin
and spreading hook up and town in order to insert into one of adjusting holes
which totally have seven groups. Put the short spread hook inside the tire
and try to place the tire in the middle of tire lever if possible
4. Pull the spreading control
valve to the direction of spreading, and spread the tire to the width needed.
The tire will probably disengage from the spreader if the spreading hook arm
is too high. Operate after it is lowered and the height is properly adjusted.