bonitron M3452ON, Руководство для пользователей

Страница: 11 / 24

User’s Manual
11
3.
I
NSTALLATION
I
NSTRUCTIONS
WARNING !
Installation and/or removal of this product should only be performed by a
qualified electrician in accordance with National Electrical Code or local
codes and regulations.
Proper installation of the Model M3452ON Active Braking Indicator is described below.
Please direct all installation and start up inquiries regarding this product to your supplier
or system integrator.
3.1.
E
NVIRONMENT
The installation site should be dry and clean without extreme temperatures.
3.2.
U
NPACKING
Upon receipt of this product, please verify that the product received matches the
product that was ordered and that there is no obvious physical damage to the unit. If
the wrong product was received or the product is damaged in any way, please contact
the supplier from which the product was purchased.
3.3.
M
OUNTING
The unit is mounted with a standard DIN rail clip attached to the back of the enclosure.
Refer to Figure 6-1 to determine the correct mounting dimensions for your unit.
3.4.
W
IRING AND
C
USTOMER
C
ONNECTIONS
This section provides information about the field connection of the M3452ON Active
Braking Indicator.
Be sure to review all system documentation as well as the power wiring information in
Section 3.4.1 before proceeding.
For the maximum wire size accepted by the individual field connection terminals, refer
to Table 3-1. Wire types and sizes should be chosen in accordance with national and
local electrical codes to meet the voltage and current levels present for your
application.
Figure 3-1 shows a typical interconnection of the M3452ON with a typical braking
chopper and I/O signals.