AHD 12XX / AHD 11XX PC Panels / Displays
Introduction
V6
9
3 Introduction
Special care must be taken when installing the Panel PCs / Dis-
plays ADH 12XX / AHD 11XX to avoid damaging these devices.
Prior to installation, panel cutouts must be sawed, and holes must
be drilled for the bolts. The corresponding dimension drawings can
be found in Chapter 4 of this document.
It is imperative to observe the devices’ installation depths. More
detailed instructions for installation locations, installation depths,
and installation angles can be found in the corresponding operation
manual, available from the manufacturer (if it is not present).
TIP!
These installation instructions outline and further ex-
plain the installation of a 19 inch panel PC / display.
However, all steps are also fully valid for installing 15
inch displays.
The mounting frame, included in the delivery, ensures an equal
distribution of force when tightening the fixture nuts. Therefore, do
not install these devices without the mounting frame.
CAUTION!
If the fixture nuts are tightened without using the
mounting frame, the devices may be irreparably
damaged!
Furthermore, the mounting frame serves as a template for marking
the cutout and the drill holes for the mounting bolts.
