AHD 12XX / AHD 11XX PC Panels / Displays
Introduction
10
V6
3.1 Required Tools
The following tools are required for installing the panel PCs / dis-
plays:
-
jigsaw (saw blade for corresponding panel material, e.g.
wood or metal)
-
drill, 5 mm bit (bit according to panel material)
-
spirit level (for ensuring levelness of the installation location)
-
torque wrench (for torque 3 Nm)
-
file, if needed
-
counter bore, if needed
3.1.1 Hardware AHD 1219 X / AHD 1119 X
The following hardware pieces (included in the delivery) are re-
quired for installing panel PCs / displays:
-
mounting frame (454 x 384 mm; 10 drill holes), used as a tem-
plate for panel cutout and drill holes
-
10 x spring washer M4
-
10 x washer M4
-
10 x hexagonal nut M4
3.1.2 Hardware AHD 1215 X / AHD 1115 X
The following hardware pieces (included in the delivery) are re-
quired for installing panel PCs / displays:
-
mounting frame (384 x 324 mm; 8 drill holes), used as tem-
plate for panel cutout and drill holes
-
8 x spring washer M4
-
8 x washer M4
-
8 x hexagonal nut M4
