Page 13
After reaching the last message no further jumping forward is possible. If such a jump is
attempted a beep will sound. The same is true for backward jumps.
5.2.
Jump to the first or last message within a folder
To reach the first recorded message in a folder, press and hold down the left arrow button
while simultaneously and quickly pressing the “Play” button (middle button which contains
no symbol). The first message will play. The last recorded message in a folder is reached in
a similar manner by pressing and holding down the right arrow button and briefly pressing
the “Play” button.
5.3.
Scrolling (navigating within a long message)
To quickly navigate within a long message, keep the left or right arrow button pressed
constantly. Scrolling as known from CD players will start after approximately one second.
The scrolling speed will increase over time from about triple speed to a maximum speed
which is about twenty-fold.
5.4.
Erasing messages
5.4.1.
Erasing one message
Playback the message you would like to erase. While the message is playing, press and
hold down the “Mode” button (bottom button with an embossed cross pattern) and briefly
press the “Play” button (middle button which contains no symbol). The command will be
executed as you let go of the buttons. A short beep will sound as an acknowledgement. A
message may be erased while it is being replayed or up to 10 seconds after the replay has
stopped.
5.4.2.
Erasing all messages in a folder in one direction
Pressing the triple-button combination “Mode”-“Play”-“FF” or “Mode”-“Play”-“Rew”
respectively will erase all messages in a given folder in one direction. The triple-button
combination needs to be pressed for two seconds. Erasing will include the message on
which the play cursor is positioned at the time the command is issued. Two long beeps will
sound as acknowledgement of the erasing procedure. One at the start of erasing and the
second one once erasing has been completed.
Attention: This function is only available in paused mode. It may take a while to complete (a
few seconds or even minutes) if a large number of messages or very long messages exist.
5.4.3.
Erasing all messages within a folder
For safety reasons, a single function that erases all messages at once within the internal
memory or a memory card has been omitted. All messages within a folder may be erased if
starting from the first message all messages are erased forward or if starting from the last
message all messages are erased backwards. Alternatively an entire folder or all messages
within a folder may be erased via the computer connection. The most efficient way for
erasing an entire memory card is also via the computer connection.