Installation manual Bondtech DDG Ultimaker V2.0
Thanks to all the beta testers for the valuable feedback.
Introduction
The Bondtech DDG Ultimaker V1.0, which was developed by Bondtech and
Christopher Matthes, is the simplest way to increase the performance of your
Ultimaker machine in a matter of minutes.
This new revolution in design utilizes the proven
Bondtech Dual Drive Technology
with precision CNC-
manufactured parts. This gives the market’s best feeder
performance and reliability.
The Upgrade allows you to prototype even faster and print with peace of mind.
Compatibility
The upgrade is compatible with the following machines:
- Ultimaker 2 with Extrusion Upgrade Kit
- Ultimaker 2 Extended with Extrusion Upgrade Kit
- Ultimaker 2+
- Ultimaker 2 Ex
- Ultimaker 3
- Ultimaker 3 Extended
What’s in the box?
Ultimaker 2+ and Ultimaker 2 Ex Upgrade Kit
1x Bondtech DDG Righthand extruder kit
Ultimaker 3
1x Bondtech DDG Righthand extruder kit
1x Bondtech DDG Lefthand extruder kit
Mechanical Installation
What you need
To install the upgrade you are only going to need a M2.0- Hex Wrench.
