Bond PBB 2 x 2, Инструкция по настройке и иллюстрированный перечень запасных частей

Страница: 14 / 52

ORDERING PARTS
1. Description of each part and its stamp number is described in this parts list. Screws and nuts for parts are
shown adjacent to the relevant parts. When ordering parts, describe clearly stamp number with its name of
part.
2. The parts which have no Ref. Number can not be delivered independently; always order it as an assembly.
3. A set of assembled parts is represented by the stamp number of its main parts.
4. The last figure on the parts stamp number advances on each improvement of the parts.
5. Parts No. described in [ ] of Remarks means old parts No.
*
The parts list is subject to change without prior notice.
When ordering parts for this binder, always start with PBB then the part number(s).
Example: PBB203081, Looper
PARTS LIST CONTENTS
(1) THREAD STAND AND THREAD TENSION PARTS............................................... 10
(2) COVERS, BUSHINGS AND OILING PARTS...........................................................11 – 12
(3) NEEDLE BAR, PRESSER BAR AND DRIVING PARTS..........................................13 – 14
(4) LOOPER DRIVING PARTS......................................................................................15 – 16
(5) FEED DRIVING AND THREAD CUTTER PARTS...................................................17 – 18
(6) MOTOR, SWITCH AND HANDLE PARTS
(FOR TOTALLY ENCLOSED TYPE MOTOR).........................................................19 – 20
- 9 –