1-866-771-2663 | Page 7
5. Unscrew and remove the fixing nut (G)
from the threaded post.
6. Insert the t
h
readed post into the
umbrella hole on the tabletop so that the
control box (B) sits flush on the tabletop.
Secure the control box to the table by
screwing the fixing nut (G) onto the
threaded post underneath the tabletop.
Be sure to tighten securely.
G
B
G
4. Unscrew and remove the cap on the
electronic igniter (K), then place the
battery AAA (H) into the battery slot.
Be sure the positive side of the battery
face outwards. Replace the electronic
igniter cap over the battery, be sure to
tighten securely.
H
K
