GSC3218WA
Owner’s Manual
8
Step 5 (Install the doors)
a) Insert the pin on the bottom of the right door (P)
into the hole on the right bottom side of the base
assembly.
b) Push down the pin on top of the right door (P)
and insert into the hole on the right side of the
cart front beam.
c) Repeat the same procedure for the left door (N).
Step 4 (Install the front beam)
a) Place the front beam (J) on front of the cart assembly.
b) Align the holes on the left inside of the cart assembly with
holes on the front beam.
c) Insert one M6 x 45mm Bolt (DD), one spring washer (BB)
and one washer (CC) into each hole.
Tighten by hand until secure.
d) Repeat the procedure for right inside of the cart assembly.
e) Go back to tighten all the bolts using the screwdriver
provided.
Step 6 (Install the body assembly with cart assembly)
a) Put the body assembly (A) on top of the cart
assembly.
b) Align the holes on the right side of cart assembly with
the holes on the right side of body assembly.
c) Insert one M6 x 18mm bolt (AA), one spring washer
(BB) and one washer (CC) into each pre-drilled hole.
d) Repeat the procedure with the left side of cart
assembly and the left side of body assembly.
e) Go back to tighten all the bolts using the screwdriver
provided.
