Bond Manufacturing Co., Inc. | Page 10
MAINTENANCE
•
Before performing any maintenance always disconnect propane gas tank.
•
Keep the heating item free and clear from combustible materials.
•
Visually inspect burner for obstructions and keep tank enclosure free and clear from debris.
•
Use a soft brush to get rid of the mild stains, loose dirt and soil after the burner and
pumice stones/
lava rocks/LavaGlass
®
are completely cooled down. Wipe down with a soft cloth.
•
Harsh weather conditions may cause stubborn stains, discoloration and possibly rust pitting.
•
Permanent damage may occur if powder or solvent comes in contact with painted or plastic
components on this heating unit.
•
Keep the heating unit stored away from direct sunlight.
•
If storing this unit inside, disconnect the propane gas tank from the gas valve.
•
Not using manufacturer approved or supplied parts/accessories may result in a defective condition
and void the warranty of this heating unit.
•
Always place lid (if applicable) or protective cover on heating item when not in use.
Envirostone
®
Surface Care
Our Envirostone
®
material has been sealed with a patented treatment to prevent staining and
moisture absorption, but it does require proper maintenance to ensure the integrity of the surface.
Please see below for recommendations on maintaining your Envirostone
®
surface for years of
pleasure:
•
Clean any spills immediately to prevent permanent Envirostone
®
surface staining or damage.
Blot any liquid spills with a clean, dry cloth to avoid spreading of the spill to the rest of the table.
Clean your Envirostone
®
surface with a soft, clean cloth or sponge. Mix a solution of warm clean
water and mild dish soap to remove any surface dirt or mild spills. Rinse all soap solution off of the
tabletop and dry completely to avoid water spots. Regularly cleaning the Envirostone
®
surface will
aid in a longer lasting product.
•
Do not use petroleum-based or abrasive cleaning products. Do not use any harsh brushes when
cleaning the Envirostone
®
surface.
•
Do not slide products across the Envirostone
®
surface to avoid permanent scratching and
damage.
•
Always use protective mats such as coasters or placemats when eating on an Envirostone
®
surface. These protective products will help absorb sweating on cool beverages and will block
out any heat rings from appearing beneath a warm mug or plate. When placing hot dishes on an
Envirostone
®
surface, always use mats or hot pads.
•
Envirostone
®
surface must be covered at all times when not in use. Cover your product with an
outdoor furniture cover when not in use to protect it from the elements. Store your product indoors
during winter months. Avoiding extreme cold temperatures will prevent cracking of the tabletop.
