1-866-771-2663 | Page 7
3.
Attach the two panel constructions made in
the previous steps by placing a M6 x 20 bolt
(AA) through a M6 washer (BB), put the bolt and
washer through the aligned bolt slots and loosely
tighten with allen wrench (HH). (You will use four
bolts and four washers for this step.) Be sure
not to over tighten - you may need to adjust the
panels later on to ensure proper alignment.
ASSEMBLY INSTRUCTIONS
1.
Align the back panel (C) to the left side panel
(E). Then attach by placing a M6 x 20 bolt (AA)
through a M6 washer (BB), put the bolt and
washer through the aligned bolt slots and loosely
tighten with allen wrench (HH). (You will use two
bolts and two washers for this step.) Be sure
not to over tighten - you may need to adjust the
panels later on to ensure proper alignment.
2.
Align the door panel (H) to the right side panel
(F). Then attach by placing a M6 x 20 bolt (AA)
through a M6 washer (BB), put the bolt and
washer through the aligned bolt slots and loosely
tighten with allen wrench (HH). (You will use two
bolts and two washers for this step.) Be sure
not to over tighten - you may need to adjust the
panels later on to ensure proper alignment.
C
E
H
F
