4
Sweep:
Sets the delay time of the Flanger effect. Turning the Sweep knob clockwise will increase
the delay time on channel 1 while decreasing the delay time on channel 2.
Feedback:
Sets the amount of resonance in the circuit. There is no resonance when the knob is
set to the center position. Turning the control clockwise from the center increases the amount of
positive feedback. Turning the control counter-clockwise from the center increases the amount of
negative feedback.
Dimension (switch):
Enables a crossfeed between the two channels, creating a unique, double-
flanger effect in mono or stereo.
The Supro Flanger runs on industry standard, 2.1mm neg. tip 9VDC power only.
The Supro Flanger does not take batteries.
The Supro Flanger has two separate channels each with its own particular character. Plugging into IN 1 and IN
2 will allow stereo processing of any sound source. Plugging into IN 1 only will automatically split your signal
into both channels. This allows you to use OUT 1 or OUT 2 or both outputs. Using the Supro Flanger in stereo
is strongly encouraged, as this unit sounds fantastic through a pair of tube amps.
When plugged in, the Supro Flanger will automatically power up in bypass. If you want the pedal to automatically
power up engaged, hold down the footswitch during power up to change this behavior. If you ever want to
switch the behavior back, simply hold down the footswitch during power up to change it back.
Width:
Sets the overall intensity of the Flanger effect.
