Multi-Appliance Slimline Control
Bonaire Control Systems
Page 6
Navigating the Controls
Navigating the Controls
SLIMLINE CONTROLLER CONNECTIONS
There are two types of Inputs/Outputs connections on Slimline Controller.
1.
Digital Communications
2.
R & W Connections
Digital Communications
Digital Communication is connected to the Slimline Controller by a 4 wire cable. The Slimline Controller will
communicate with other Climate Technology products in accordance with the control system specification.
R & W Connection
This connection provides a 2 wire screw terminal for power(R) and the Heat output (W) connection. The
Slimline Controller will obtain power from these connections.
IMPORTANT:
These connections are only to be used if connecting to a Heater in two wire mode. This
connection must not be used if the digital communications are connected.
NOTE:
If the Slimline Controller is being used to operate both a heater and a cooler, then only digital
communication should be used.
Digital
Communications
R & W
Connections
