Bona Power Drive AS0003201, Руководство по установке

Страница: 7 / 12

7
5)
Remove the drill guide, turn it over, place it on the other
side of the chassis and repeat the same steps to drill the
remaining hole.
6)
Use the supplied 8mm-1.25 tap and handle to create threads
in each of the drilled holes, configuring them to accept screws.
A lubricant such as WD-40 can be used to assist with the
tapping process.
4)
Drill a hole through the chassis using the drill guide and the
supplied 17/64" drill bit.
Installation Instructions (Cont.)