7
4. Product Safety Notes
4.1. Device Safety
Incorrect use of the device, accessories and electrical components can
cause health damage, material damage and can lead to malfunctions and
damage to the device. The device must only be used for the appropriate
purpose specified.
Before using the tool for the first time, please read the operating instructions
carefully and familiarize yourself with the product. This is essential to ensure
safe and perfect operation of the device.
4.2. General Safety Notes
General safety and accident prevention regulations must be observed! In addition
to instructions specified in these operating instructions, the general safety and accident
prevention regulations specified by law must be observed. Keep your work area tidy!
Untidiness in the work area can cause accidents.
Pass the operating instructions on to third parties. Makes sure third parties only use this
device after receiving the instructions required.
Handle and operate your Bona OptiSpread 100 battery with care at all times.
The Bona OptiSpread 100 Battery must only be used by specialists or specifically trained
staff. If it is used by unqualified staff, this may result in serious operating errors and personal
injury.
Keep the device out of reach of children and ensure prevention of unauthorized use.
Never leave the operative or used device unsupervised. Do not allow any children
near to the device. It is forbidden for children to use this device. Ensure the product
cannot be used by unauthorized persons.
Look out for any damage to the device. Before use, check the device for any damage. If
damage to the device is identified, it must not be used.
Do not use any sharp items. Never insert any sharp and/or metallic items into the inside of
the device.
The Bona OptiSpread 100 Battery must only be filled with Bona saline adhesive in a foil bag
5400 ml. The machine must not process any non-system adhesives. This will result in the
exclusion of all warranty claims. Make sure the temperature of the adhesives corresponds
approximately to room temperature. Cold adhesives are more viscous which results in higher
battery consumption and strain for the feeding unit. Therefore, always acclimatize the
adhesive sufficiently before processing.
