Bona AMO530005, Руководство и инструкции по безопасности

Страница: 8 / 13

Bona DCS70
8
Cleaning the coarse filter through cleaning valve
In order to get maximum suction capacity is the dust extractor equipped with a cleaning valve which
effortlessly cleans the coarse filter.
1. Start the machine
Start button is
set to “I”
(Machine ON)
2. Block the suction hose
by the work place. Wait
about 7-10 sec. while the
machine builds up a
vacuum.
3. Press the filter cleaning valve hard
Repeat the whole process 3 times.
N.B. Clean the filter every time you start and before you stop the machine.
Replacing the coarse filter
1. Open the cyclone lid 2. Remove the lid
3. Replace the coarse filter and
place the old filter in a plastic
bag
Replacing the HEPA13 filter
1. Remove lid
2. Loosen the nuts
3. Remove filter
in a plastic bag
4. Seal the bag
and place a new
filter
5. Place the HEPA filter in a plastic bag to prevent harmful particles spread into the
environment!
Warning
Health impairing dust can be spread when cleaning the coarse filter and during filter and bag
replacement. Accordingly, the user should wear tight fitting clothing, protective glasses, protective
gloves and a breathing mask conforming to protection class PFF3 or NIOSH approved N95 Dust
Respirator Mask.