4 Safety instructions
bon CP-50
GA bon CP-50 Rev 1.0 E 271205
7/21
4 Safety
instructions
Please observe the statutory accident prevention regulations and the following safety
instructions!
Setting up and installation:
The chart projector must not be operated or set up in damp conditions
Avoid water splashing or spraying onto device
Connect the device to a properly installed mains socket or power supply, e.g. on a
testing unit (230V
∼
).
Operating:
The chart projector may only be operated by suitably trained staff.
Do not expose to extreme temperatures. The recommended temperature range is
b10° C and +40° C.
The chart projector is not designed to be operated in areas where there is a risk of
explosion.
Do not place any objects on the ventilation vents on the casing. This causes the
projector to heat up and can destroy it.
Do not insert any objects on the ventilation vents on the casing.
Do not look directly into the projection lens, as this may damage the eyes.
Other information:
To unplug - do not pull the cable; pull the plug itself.
Ensure that the cable is not damaged (e.g. sharp edges or heat).
Disconnect from power supply prior to carrying out repairs, servicing or maintenance
work.
