6 Operating
bon CP-50
GA bon CP-50 Rev 1.0 E 271205
14/21
6.5 Programming test series
The remote control allows two separate test series consisting of 30 tests each to be
programmed. These can be called up at a later stage with the program keys [1] and [2].
6.5.1 Programming a test series
Step 1:
Press the [1] or [2] key.
Step 2:
Press [IN] key.
Step 3:
Press key for the test selected first.
Step 4:
Press [
c
] key.
Repeat steps 3 and 4 until all selected tests are programmed.
Step 5:
Press [Out] key.
6.5.2 Calling up and ending a test series
Call up the test series required with the program keys [1] or [2]. The first test is displayed.
Next test:
Press [
c
] key.
Previous test: Press [
d
] key.
Press any test on the remote control to end a test series.
6.5.3 Changing a test series
Step 1:
Press the [1] or [2] key.
Step 2:
Press the [
c
] key until the test to be changed is displayed.
Step 3:
Press [IN] key.
Step 4:
Select the new test.
Step 5:
Press the [
c
] key until the end of the test series.
Step 6:
Press [OUT] key.
Shortening a test series:
Press the [
c
] key in step 5 until you reach the test after the one to be ended.
