-- 42 --
Multi Monitor Control can be operated by exclusive use Adaptor(RS-232C <-> Serial Conversion)
Converting device and by PC where exclusive use program (Wall System Controller) is installed.(Option)
Adaptor(RS-232C <-> Serial Data)Converting Device
PC (Control S/W)
BWC-100
A
8-1. Multi Monitor Control (through Update Port)
.
8. Program Update Port(RJ-11)
Update Port(RJ-11) can be used in a situation as below.
1) To modify Firmware program
2) To control Color Temperature, Gamma Setting for LCD
3) To control Multi Monitors using PC Exclusive use program “Wall System Control” on PC
!
Please consult with technician for Program Update or for Serial Port
use. Incorrect use of this port may cause damage or malfunction.
1 2 3 4 5 6
Update (RJ-11)
Update Terminal Assignment
1 PIN
NC
4 PIN
GND
2 PIN
RX+
5 PIN
TX+
3 PIN
RX-
6 PIN
TX-
1 2 3 4 5 6
