-- 12 --
①
REMOT(RJ-45 Jack)Port
-Used for external Control(Make/Trig type terminal)
-For detailed information, please refer to category8. Terminal Assignment Connection
②③④⑤
:SDI Input Port
- HD/SD-SDI Signal Input Port. SMPTE standard type. Aviailable to input SDI signal which includes
Audio Signal.
⑥
Y/C(S-Video) :
-Used to input Y/C(S-Video) Signal
⑦
DVI-I :
-Used to input DVI-I Digital Signal
⑧
HDMI :
-Used to input HDMI Digital Signal(HDCP1.1 Support)
⑨
AC INPUT Port :
-Used to supply AC(100V~230V)Power
Used only the power cord designated to ensure safety and EMC regulation of each
countries
⑩
UPDATE Port(RJ-11 Jack)
-Serial Communication Port. This Port is used to modify monitor program or to control Monitor.
-For detailed information, please refer to category 7. Program Update Port
⑪
AUDIO IN/OUT
-Input/Output terminal for the external Audio and Embedded Audio Signal.
-Please refer to category3-3. Audio Input/Output for detailed information
⑫
SDI LOOP OUT PORT
-This is Active Loop Signal Output Terminal for each of SDI1,2,3,4
IF Monitor is Stand-by OFF, it does not work
⑬
LTC IN Port (Longitudinal Time Code)
-Used to match clock source with external LTC input signal in sync in Split Mode 4
⑭
Component YUV/RGB & CVBS1,2,3 Input Port
-Used to input Composite signal/ Component (YPbPr/ RGB) Signal
