6
VIII. Faulty Disposal
Familiar Faulty
Disposal
No display when power is
on
1. Check if the power is correctly connected
2. Check the power supplier`s output is DC24V
Light is out of control
1. Check if DMX address code is correctly set
2. Check if the DMX cable is correctly connected
The light is off after working
for a while
1. Check the sensor is soldering on the LED PCB
2.Check the temperature is too high
3. check the power supplier is demaged
The beam is dark obviously
1. Check if the temperature is too high, and cause a fast fade
2. Check if there is too much dust on the surface of light
Note:
Please contact the supplier or ask for professional repair if it’s still don’t work when excluded the above
faulty.
