- 23 -
indicator and red reflective one. On the machine there must be a triangular sign for low speed
vehicles placed. Portable light devices are connected with the tractor wiring with the use of a
connecting cable ended with 7-pole plugs.
Moreover, the tractor, on which the planter is mounted, should fulfill conditions of
admitting it to motion on public roads in accordance with Highway Code.
CAUTION !
It is forbidden to move on public roads without the proper marking (Ordinance of
Minister of Infrastructure
of 31 December 2002 Journal of Laws (“Dziennik
Ustaw”) No 32/2003 item 262 with later amendments.
Planter transported on a tractor suspension system, on public roads must be
obligatory equipped with portable light and warning devices and a triangular sign
for low-speed vehicles installed in special handles installed on the machine.
It is forbidden to transport people or cargo on the frame of the planter.
CAUTION !
When turning, pay attention to “overlapping” of the machine.
7. DISASSEMBLY
CAUTION
Before starting to disassembly, disconnect the planter from the tractor.
Disassembly of the machine should be performed by people, equipped with protective
gloves and previously acquainted with its construction. These activities should be done after
setting the machine on the flat and solid ground. Disassembly and changing the working
parts should be performed according to the tables included in the spare parts catalogue. In
case of worn parts, follow ‘Totalling’ point.
Due to a number of planter parts exceeding 20 kg (frame, tank), during disassembly
use lifting devices.
CAUTION
Lifting devices used during disassembly can be operated only by a person
properly authorized and qualified.
All fixings are made of normalized elements adjusted to metric keys. For key
movement there are free spaces ensuring unconstrained unscrewing and tightening up nuts
and screws predicted. In case of screws of yoke fastening working sections to the frame, use
bent box spanners.
8. TOTALLING
Totalling of the planter shall be performed after its previous complete disassembly and
inspection of the machine parts. During disassembly, parts should be grouped according to
the material type - ferrous metals. Worn parts made from ferrous metals shall be grouped
and passed to points purchasing these metals.
