44
Pre-Operation Check
Before using this vehicle, the operator should
always:
• Apply parking brake and check if it oper-
ates properly.
• Check tire pressure and condition.
• Check wheels and bearings for wear and
damage.
• Check location of controls and ensure they
work properly.
• Verify if steering operates freely.
• Activate throttle control lever several times
to ensure it operates freely. It must return
to idle position when released.
• Activate the brake lever and brake pedal
to make sure the brakes fully apply. Lever
and pedal must fully return when released.
• Ensure transmission lever is working then
reset in PARK position.
• Check fuel, oil and coolant levels.
• Check for oil leaks on the engine/gearbox
and drive train components.
• Clean headlamps and taillight.
• Ensure front access compartment cover
and rear storage compartment cover are
properly latched.
• Ensure that the operator’s and either the
passenger’s seats or the storage box are
in place and properly latched.
• If you transport cargo, respect load capac-
ity. Ensure cargo is properly secured to the
racks.
• If you are pulling a trailer or other equip-
ment, ensure it respects the tongue capac-
ity and towing capacity.
• Ensure trailer is properly secured to hitch.
• Look and feel for loose parts while engine
is off. Check fasteners.
• Ensure the path of travel is free of persons
and obstacles.
• Check operation of ignition switch, start
button, engine stop switch, headlamps,
taillight and indicator lights.
• Check passenger’s seat and backrest
condition.
• Check the grab handles condition.
• Educate the passenger concerning the ba-
sic rules for a safe ride.
• Make sure that the passenger, if carrying
one, is seated on the designated passen-
ger's seat.
• When storage box is installed (in place of
rear seat), check if it is latched properly.
• Start engine and drive forward slowly a few
feet and apply all brakes individually to test
them.
• Check operation of 2WD/4WD selector.
Correct any problem you may have found be-
fore riding. See an authorized Bombardier
ATV dealer as necessary.
WARNING
The pre-operation check is very important
prior to operating the vehicle. Always
check the proper operation of critical con-
trols, safety features and mechanical com-
ponents before starting. If not done, se-
vere injury or death might occur.
Содержание outlander max 800
