BOMBARDIER outlander max 800 Скачать руководство пользователя страница 115

Страница: 115 / 160

113

CARGO AND TRANSPORTATION

While reading this Operator’s Guide, remember that:

Cargo

When cargoing vehicle, respect these maximum loads.



WARNING

Indicates a potential hazard that, if not avoided, could result in serious injury or death.



WARNING

The vehicle handling, stability and braking distance are affected when loading racks and

using the vehicle. Correct loading and weight distribution are therefore important. Never over-

load, tow or carry cargo improperly. Always ensure the cargo is safely secured and properly

distributed on the rack(s) before operating the vehicle. Safely reduce speed according to

terrain conditions when carrying cargo or pulling a trailer. Allow greater distance for breaking.

Always secure cargo as low as possible on the rack(s) to reduce the effect of a higher center

of gravity. Failure to follow the recommendations here could cause changes in vehicle han-

dling which could lead to an accident resulting in severe injuries including the possibility of

death.

MAXIMUM LOADS

Total load allowed

272 kg (600 lb)

Includes weight of operator, passenger, cargo,

accessories and trailer tongue weight.

Front load

45 kg (100 lb)

Evenly distributed.

Rear load

90 kg (200 lb)

Evenly distributed.

Includes rear rack, rear storage box and tongue

load.

Содержание outlander max 800

































































































































































Результаты поиска

Содержание outlander max 800

Отзывы:

BOMBARDIER outlander max 800, Руководство оператора, Страница: 115 / 160

Результаты поиска

Содержание outlander max 800

Отзывы: