Bomar Practix 285.230 G Pulldown, Руководство по эксплуатации

Страница: 29 / 85

29
Do
ku
me
nt
ace s
troje
Do
ku
me
nt
at
ion der
Mas
c
hi
nen
Machine docume
ntation
2.16.3. Saw band running-in
To ensure a full service life of the saw bands, we strongly recommend that you carry out
the „RUN-IN“ process.
Running in: Cut the material with the frame lowering reduced to 50% only. When
vibrations occur increase or decrease the band speed.
When cutting small pieces run the band until approximately 300 cm2 of material has
been cut. When cutting large pieces run the band for 15 minutes approximately.
When the band has been run, increase the lowering-speed to normal speed. The
running in of the saw band avoids micro-breaks on the cutting edges of new saw band
ensuing from first excessive stress. This would decrease service life substantially. The
optimal running in of the saw band produces ideal rounded cutting edges and
therefore the conditions for an optimal service life.
Note:
Run regrinding bands too!