BOMANN WA 5712, Руководство пользователя

Страница: 11 / 20

11
09/2013
Note:
‘ ’ is for Standard Cotton programme.
Standard Cotton at 60 °C and 40 °C are suitable to clean normally soiled cotton laundry and they are
the most efficient programs in terms of combined energy and water consumptions for washing that
type of cotton laundry; in addition, the actual water temperature may differ from the declared cycle
temperature.
NOTE: At the end of a wash cycle the knob must be turned to the position ‘Off’.
ATTENTION: For your safety, please not turn the knob to the position ‘Aus’ (Off) and get clothes
while the machine is running. Because the temperature of water may be high and it may scald you.
The door lock will open automatically at the end of a wash cycle while the temperature of the drum
is cool down.
2. Temperature regulating knob
This knob allows for the adjustment of the temperature.
Rotate this switch and select a required wash temperature: -30 -40 -50 -60 -70 -80 -90°C.
If no temperature is selected the washing temperature is cold.
3. Spin regulation
This button is used to adjustment the spin speed. To change setting, press the corresponding key
repeatedly until the desired value is shown on the digit display. In section 000 no spin, the machine
does not spinning. Please note, the section of spin speed is not available for each programme.
4. Extra Rinse and Rinse hold
This button allows for the select extra rinse or rinse hold function. Upon each press of the button
the LED indicator changes state; there are three possible combinations which are:
LED on Extra rinse
LED blinking Rinse hold
LED off No option is selected
Please note the option is not available in each washing programme.
Rinse hold
The anti-crease function, when activated the washing machine stops with water in the tank without
having to drain and spin. To run the drain and spin, the Start/Pause button
at the corresponding
blinking LED must be pressed.
Note: To remove creases completely, it is need to iron your clothes.
5. Pre-wash and Soak
This key allows for the selection of pre-wash or soaks function. Upon each press of the button the
LED indicator changes state There three possible combinations which are:
LED on Pre-wash
LED blinking Soak
LED off No option is selected
Please note the option is not available in each washing programme.
Pre-Wash
The pre-wash function is used to make a low temperature washing for large dirty particles before
the main wash cycle to remove stains.
Soak
The soak function is used to soak strongly dirt clothes before main wash cycle.
6. Start/Pause
Press this button to start or pause the machine. The LED of ‘Start/Pause’ blinking when the ma-
chine is in Standby mode or pauses, and it is lighted when running.
7. Delayed start and child safety lock
This button, when selecting a washing programme, it allows for the adjustment of the delay start
function; while after starting the wash cycle it allows for the activation of the child safety locking fea-
ture.