8
WARNING:
WARNING:
WARNING:
WARNING:
Keep rinse aid and detergent out of reach for children.
A
AA
A. . . .
Fill the rinse aid dispenser
Fill the rinse aid dispenser
Fill the rinse aid dispenser
Fill the rinse aid dispenser
Function of rinse aid
Function of rinse aid
Function of rinse aid
Function of rinse aid
The rinse aid is automatically added during the final rinse, ensuring thorough rinsing and a spot and streak
free drying.
When to refi
When to refi
When to refi
When to refill the rinse aid dispenser
ll the rinse aid dispenser
ll the rinse aid dispenser
ll the rinse aid dispenser
As long as the rinse aid warning lamp does not light up on the control panel, you can esti-
mate the amount of remaining rinse aid to the optical level indicator "D" next to the dis-
penser.
When the rinse aid dispenser is full, the indicator is completely dark. If the rinse aid diminishes, the size of
the black dot changes as shown below. In order to avoid spotting, the rinse aid level must not drop below ¼.
full
¾ full
½ full
¼ full – refill
empty
Fill in the rin
Fill in the rin
Fill in the rin
Fill in the rinse aid
se aid
se aid
se aid
1.
To open the dispenser screw the lid counterclockwise to the open position (top arrow) and remove the lid.
2.
Add the rinse aid into the dispenser; being careful not to overfill. The dispenser contains approx. 110 ml.
3.
Put on the lid in the open position back and turn it clockwise to the closed position (right arrow).
NOTE
NOTE
NOTE
NOTE::::
•
Remove during refilling spilled rinse aid with an absorbent cloth to avoid excessive foaming during the next
rinse.
•
Don’t forget to replace the lid before closing the appliance door.
Adjusting the rinse
Adjusting the rinse
Adjusting the rinse
Adjusting the rinse aid dosage
aid dosage
aid dosage
aid dosage
When forming spots and the dishes dries poorly, increase the added amount of rinse aid. You can set the
amount of addition between level 1 (min.) and level 6 (max.).
Take off the lid of the rinse aid dispenser and adjust the dial to the desired level. The factory set-
ting is "4".
NOTE
NOTE
NOTE
NOTE::::
Increase the dosage if there are drops of water or lime spots on the dishes after rinsing. Reduce the dosage if
there are sticky whitish stains on dishes or a bluish film on glassware or knife blades.