BOMANN TSG 707, Инструкция по эксплуатации

Страница: 20 / 25

18
Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it
run into the sink, making sure to avoid bending or crimping it. Use the spe ial
plastic support that comes with the appliance. The free end of the hose must be
at a height lower than75cm and must not be immersed in water to avoid the back
flow of it.
c
The special plastic hose support must be solidly fastened to the wall to
prevent the drain hose from moving and allowing water to spill outside
the drain.
Turn off the water.
Release th e water pres sure by depressing the pressure release button. This relieves wate r pressu re and p rotects
you, and the ro om, from severe splashing.
Unscrew The safety supply hose from the faucet..
3
2
1
Connect the cold water supply hose to a threaded 3/4(inch) connec tor and make sure that it is fa stened tight ly in place.
If the water pipes are new or have not been used for an extended period of time, let the water run to mak e su re that t he
water is clear and free of impurities. If this prec aution is not taken, t here is a risk that the water inlet can get blocked and
damage the appliance.