BOMANN SBS 7314 IX, Инструкция по эксплуатации

Страница: 19 / 28

19
Appliance Equipment
Appliance Equipment Appliance Equipment
Appliance Equipment
Ap
Ap Ap
Appliance overview
pliance overview pliance overview
pliance overview
A Freezer A Freezer A Freezer A Freezer B Fridge B Fridge B Fridge B Fridge
1111 Glass shevels 4444 Glass shelves
2222 Door storage racks 5555 Door storage racks
3333 2-Star freezig drawer 6666 Vegetable box
Delivery scope Delivery scope Delivery scope Delivery scope
Fridge:
Fridge: Fridge:
Fridge:
5x glass shelf, 1x vegetable box, 4x door
storage rack, 1x egg tray
Freez Freez Freez Freezer: er: er: er:
5x glass shelf, 1x freezing drawer, 4x door
storage rack, 1x ice-cube tray
Installation
Installation Installation
Installation
Condition Condition Condition Conditions for the installation location s for the installation location s for the installation location s for the installation location
•
Good ventilation is required around the appliance,
in order to dissipate the heat properly and to
guarantee efficient cooling operation at low power
consumption. Sufficient clearance is necessary.
-
Gap to the back approx. 5 cm and to the side
walls each approx. 10 cm;
-
Place the appliance so that the appliance
door can open without being impeded.
•
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to the “EU Product Data Sheet” or to the rating la-
bel located in the interior or on the appliance rear.
•
Place the appliance on a steady and safe surface.
If the appliance is not horizontally leveled, adjust
the feet accordingly.
•
Avoid the installation: Avoid the installation: Avoid the installation: Avoid the installation:
-
near heaters, next to a stove, direct sunlight or
any other heat sources;
-
at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
-
near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e.g. garages).
-
Do not expose the appliance any weather.
Le Le Le Levelling the appliances doors velling the appliances doors velling the appliances doors velling the appliances doors
If the doors are uneven and do not close parallel to
each other, the refrigerator door must be aligned.
Maximum tolerance compensation is 5 mm!
Maximum tolerance compensation is 5 mm! Maximum tolerance compensation is 5 mm! Maximum tolerance compensation is 5 mm!
Open the door, loosen the locknut (1) with a
wrench (a)..
..
if the refrigerator door is too low
, turn the adjusting
nut (2) counterclockwise counterclockwise counterclockwise counterclockwise to raise the door.
..
if the refrigerator door is too high
, turn the adjusting
nut (2) clockwise clockwise clockwise clockwise to lower the door.
Once the doors are aligned, retighten the locknut (1).
Electrical Electrical Electrical Electrical connectio connectio connectio connectionnnn
WARNING: WARNING: WARNING: WARNING:
•
The installation to the mains supply must conform
to the local standards and regulations.
•
Improper connection may cause to an electric
electric electric
electric
shock
shock shock
shock!