15
1
Power: button to turn on/off the power supply.
2
Delay: button to select the start delay by
1-24 hours. Select the operating conditions and
start the program. The device starts automatically,
after the selected time has elapsed.
3
Program: Button to select the rinse program.
4
: Button to activate/deactivate the ½ loading
function. Consider that the function is program
dependent!
5
The control lamps indicate the program selection.
6
Control lamp: lights up when rinse aid must be
added.
Control lamp: lights up, when dishwasher salt
needs refilling.
7
The indicator lights show the program progress.
Pre-rinse->Main rinse->Rinse->Drying->End
Starting a program
The water supply must be opened to the maxi-
mum pressure.
Load the dishwasher baskets.
Fill in the detergent.
Turn on the appliance.
Set the required program options.
Start the operation by closing the appliance door.
Changing the program
CAUTION:
A program change should be done only a short time
after starting the program. Otherwise, maybe deter-
gent has been released and already drained rinse
water.
To make a program change, carefully open the
appliance door so that you can operate the control
panel.
Press the Program selection button for more than
3 seconds.
Select a new program and close the appliance
door.
Forgot to add a dish?
WARNING:
Open the door very carefully during operation, there
is a risk of water squirting out.
Dishware can be added any time before the deter-
gent dispenser opens.
Carefully open the appliance door a little. Once
the spray arms stop working, you can fully open
the door.
Add forgotten dishware.
Close the appliance door, the operation will con-
tinue after approx. 10 seconds.
At the end of program
CAUTION:
Allow the appliance to cool down a bit after the pro-
gram has ended, before you open it. This avoids that
steam escapes that causing long-term damages to
your furniture.
At the end of the rinse cycle will sound a series of
signals; then the unit goes into standby mode.
If no operation takes place within 15 minutes, the
device switches off automatically - energy-saving!
Turn off
Turn off the appliance.
Close the water supply, if necessary!
Remove the dishes after cooling (see "Unloading
the dishwasher").
Leave the appliance door slightly open until the
next rinse cycle to avoid odors.
