19
NOTE
NOTE
NOTE
NOTE::::
•
*Delivery scope!
Keep the parts to be replaced for another possible
door stop change.
•
Remove the hinge cover and the blanking cap.
•
Dismount the upper door hinge and lift out the
appliance door.
•
Transfer the doorstop on the door underside. Set
the appliance door safely aside.
•
Tilt the unit slightly backwards and lock it in this
position. Unscrew the feet and disassemble the
lower door hinge.
•
Move and fasten the lower door hinge to the op-
posite appliance side. Screw in the feet accord-
ingly.
•
Put the appliance back in the upright position. Put
on the appliance door and fix it in the intended
position.
•
Move and fasten the upper door hinge to the op-
posite appliance side after unscrewing the hinge
pin and inserting it from the other hinge side.
•
Put on the hinge cover (*delivery scope) and the
blanking cap.
•
Check that the door is optimally aligned both ver-
tically and horizontally to ensure smooth opening
and closing of the door.
•
Dismount the door handle and attach it to the
corresponding other door outer side. Refer to the
instructions in "Assembling the door handle".
Transfer the cover caps on the exposed holes to
the respective other door outer side.
Startup /
Startup /
Startup /
Startup / Operation
Operation
Operation
Operation
Prior to first use
Prior to first use
Prior to first use
Prior to first use
CAUTION:
CAUTION:
CAUTION:
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter “Cleaning and Maintenance”.
