26
•
Then you can put the appliance back into opera-
tion by connecting it to the power supply and ad-
justing the temperature control.
Replacing the door hinge
If the appliance door starts to stutter, crack or jam
when you open it, it is probably due to a worn or
damaged hinge.
It is recommended to replace all door hinges at the
same time, otherwise the next repair will soon be
beckoning.
•
Remove the contents of the appliance and the
movable interior parts.
•
Tilt the appliance backwards and block it in this
position to prevent the door from sliding out.
•
Loosen the appliance cover as described under
“Reversing the door opening”
and disassemble
the upper door hinge.
•
Turn out the stand and disassemble the lower
door hinge.
•
The respective hinge assembly is carried out in
reverse order.
•
Open and close the appliance door for a test run,
readjust the hinges if necessary. In any case,
make sure that the door fits tightly and accurately.
Replacing the door handle
A malfunction due to too active use, may cause dam-
age to the door handle.
•
Loosen the screw cover caps.
•
Unscrew the screws underneath and remove the
door handle.
•
The door handle is mounted in the reverse se-
quence, see also
“Assembling the door handle”
.
Troubleshooting
Before you contact an authorized specialist
Problem / Cause / Action
Appliance is not working properly or at all
-
Check the power supply / temperature setting /
ambient temperature.
-
Unblock the ventilation openings, install the ap-
pliance freely.
Loading is too warm
-
Check the temperature setting / ambient temper-
ature.
-
A large quantity of warm food has been stored in
the unit in the last 24 hours.
-
The appliance door is not closed properly, check
the door seal.
Loud noise during operation
-
Check that the appliance is level.
-
See
"Operating noise"
.
Water on the appliance bottom
-
Check the temperature setting.
NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.
