•
Remove the rack by slightly bending the lowest
metal rod to loosen it from the lower mounting
screw and pulling it towards the oven
•
Lift the rack upwards out of the upper
holes.
•
Replace the racks after cleaning and thoroughly
drying them.
Cleaning the glass panel
Cleaning the glass panel
Cleaning the glass panel
Cleaning the glass panel
If necessary, clean the inside of the glass panel.
•
Open the appliance door.
•
Remove the retaining strip by
loosening the screws laterally of
the strip.
•
Take off the glass carefully forward.
•
Replace the glass panel and affix
strip; after you’ve cleaned the glass and dried it
thoroughly.
Reverse the bulb
Reverse the bulb
Reverse the bulb
Reverse the bulb
WARNING:
WARNING:
WARNING:
WARNING:
•
Make sure that the appliance is turned off from
the power supply (fuse).
•
Allow the lamp to cool down before replacing the
bulb. There is risk of
There is risk of
There is risk of
There is risk of burns!
burns!
burns!
burns!
NOTE
NOTE
NOTE
NOTE::::
Use the correct bulb, heat resistant up to 300°C:
1 x
1 x
1 x
1 x 25
25
25
25 W, 22
W, 22
W, 22
W, 220000----240
240
240
240 VVVV~~~~
•
Unscrew the lamp cover and clean it with a dry
cloth.
•
Change the bulb.
•
Reattach the lamp cover and check the functio
ality.
13
Remove the rack by slightly bending the lowest
lower mounting
oven center.
upper mounting
Replace the racks after cleaning and thoroughly
If necessary, clean the inside of the glass panel.
Take off the glass carefully forward.
Replace the glass panel and affix the retaining
; after you’ve cleaned the glass and dried it
Make sure that the appliance is turned off from
Allow the lamp to cool down before replacing the
Use the correct bulb, heat resistant up to 300°C:
Unscrew the lamp cover and clean it with a dry
heck the function-
Trou
Trou
Trou
Troubleshooting
bleshooting
bleshooting
bleshooting
Before you contact an
Before you contact an
Before you contact an
Before you contact an authorized specialist
authorized specialist
authorized specialist
authorized specialist
Problem
Problem
Problem
Problem
Possible causes
Possible causes
Possible causes
Possible causes
Appliance
does not
work
The power supply
is disconnected.
Oven lamp
does not
work
Bulb is defective,
has been inserted
incorrectly or not
firmly.
Strong for-
mation of
smoke
Grease residue in
the oven.
NOTE:
NOTE:
NOTE:
NOTE:
If a problem still persists after following
above, contact your distributor or an authorized tec
nician.
Technical Data
Technical Data
Technical Data
Technical Data
Electrical connection…………………………...………..
Electrical connection…………………………...………..
Electrical connection…………………………...………..
Electrical connection…………………………...………..
Connection voltage: ....220-240/
Connection power: ………………………..…........8
Fuse protection: ………………...……………...…3 x 16 A
Protection class: ………………………..…..………I / IP20
Dimension H x W x D / Weight……...……..…………..
Dimension H x W x D / Weight……...……..…………..
Dimension H x W x D / Weight……...……..…………..
Dimension H x W x D / Weight……...……..…………..
Hob installation: …………….….………
Oven installation: ….…………...60.0
Total net weight: ………………….……..……...34
Available accessory
Available accessory
Available accessory
Available accessory
Telescopic set: ………...……….
The right to make technical and design modifications
in the course of continuous product development
remains reserved.
bleshooting
bleshooting
bleshooting
bleshooting
authorized specialist
authorized specialist
authorized specialist
authorized specialist
Possible causes
Possible causes
Possible causes
Possible causes
What to do
What to do
What to do
What to do
The power supply
disconnected.
Check the fuse
of your domestic
wiring system.
ulb is defective,
has been inserted
incorrectly or not
Check the bulb,
see “Reverse
the bulb”.
Grease residue in
Switch off the
oven and allow
to cool down
before cleaning.
If a problem still persists after following the steps
above, contact your distributor or an authorized tech-
Technical Data
Technical Data
Technical Data
Technical Data
Electrical connection…………………………...………..
Electrical connection…………………………...………..
Electrical connection…………………………...………..
Electrical connection…………………………...………..
240/380-415V 3N~ 50/60Hz
Connection power: ………………………..…........8300 W
………………...……………...…3 x 16 A
Protection class: ………………………..…..………I / IP20
Dimension H x W x D / Weight……...……..…………..
Dimension H x W x D / Weight……...……..…………..
Dimension H x W x D / Weight……...……..…………..
Dimension H x W x D / Weight……...……..…………..
Hob installation: …………….….………56.0 x 49.0 cm
….…………...60.0 x 56.0 x 57.0 cm
eight: ………………….……..……...34.5 kg
……...……….Article-No. 8 996 090
The right to make technical and design modifications
in the course of continuous product development