Hob
Hob
Hob
Hob
NOTE
NOTE
NOTE
NOTE::::
The listed power settings can vary depending on the
material and/or size of the cookware.
1111 Residual heat indicat
2222 Ø 14.0 cm / 1200 W
3333 Ø 18.0 cm / 1700 W
4444 Ø 14.0 cm / 1200 W
5555 Ø 18.0 cm / 1700 W
De
De
De
Delivery scope
livery scope
livery scope
livery scope
1 x oven tray, 1 x grill grid, installation
Installation
Installation
Installation
Installation
WARNING:
WARNING:
WARNING:
WARNING:
The installation and the connection to the main power
may only be performed by an authorized specialist.
CAUTION
CAUTION
CAUTION
CAUTION::::
•
The worktop, the cabinet, veneers
ings, used adhesives etc. must be sufficient
resistant.
•
The appliance must be installed so that heat can
be dissipated. The ventilation openings must not
be blocked.
•
Do not mount any heat protection strips in order
to ensure an adequate supply of cooling air.
•
Keep a sufficient distance from the rear of the unit
for air circulation.
NOTE
NOTE
NOTE
NOTE: : : : R
R
R
Recommendation!
ecommendation!
ecommendation!
ecommendation!
•
When installing, ask another person to assist.
•
Wear protective gloves to avoid injuries at
ble sharp edges.
•
When carrying the appliance use the
the housing sides.
•
Hob and oven must be from the same manufa
turer and marked with the same type
6
depending on the
material and/or size of the cookware.
Residual heat indicator
14.0 cm / 1200 W
18.0 cm / 1700 W
14.0 cm / 1200 W
18.0 cm / 1700 W
installation material
and the connection to the main power
may only be performed by an authorized specialist.
, the cabinet, veneers, plastic coat-
adhesives etc. must be sufficient heat-
must be installed so that heat can
be dissipated. The ventilation openings must not
Do not mount any heat protection strips in order
to ensure an adequate supply of cooling air.
Keep a sufficient distance from the rear of the unit
When installing, ask another person to assist.
ctive gloves to avoid injuries at possi-
When carrying the appliance use the hollows at
same manufac-
turer and marked with the same type designation.
•
The appliance conforms to the heat insulation
class Y, i.e. only one side of the appliance may be
installed near higher kitchen furniture or walls.
•
Do not install the appliance directly next to
erators of freezers. The escaping heat would r
sult in an unnecessary increase of energy co
sumption of those appliances.
•
Make sure that the oven and the hob are located
centrally to each other.
Cabinet opening
Cabinet opening
Cabinet opening
Cabinet opening and appliance dimensions
and appliance dimensions
and appliance dimensions
and appliance dimensions
Prepare the cabinet opening
sional drawings.
Dimensions in mm
Preparing the worktop for
Preparing the worktop for
Preparing the worktop for
Preparing the worktop for installation of the hob
installation of the hob
installation of the hob
installation of the hob
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Before cutting secure the outer
adhesive tape to avoid traces of jigsaw on the
top.
•
The worktop must be leveled horizontally and are
sealed to the wall side against overflowing liquids
or moisture.
•
The hob must be completely surrounded by min.
60 mm work surface.
The appliance conforms to the heat insulation
class Y, i.e. only one side of the appliance may be
installed near higher kitchen furniture or walls.
Do not install the appliance directly next to refrig-
erators of freezers. The escaping heat would re-
sult in an unnecessary increase of energy con-
sumption of those appliances.
Make sure that the oven and the hob are located
and appliance dimensions
and appliance dimensions
and appliance dimensions
and appliance dimensions
cabinet opening according to the dimen-
installation of the hob
installation of the hob
installation of the hob
installation of the hob
the outer cutout edge with wide
adhesive tape to avoid traces of jigsaw on the work-
leveled horizontally and are
sealed to the wall side against overflowing liquids
must be completely surrounded by min.
