•
Make sure to connect the protective ground to the
terminal of the marked terminal block.
•
The electrical installation of the oven should be
equipped with an emergency switch, which
switches off the whole appliance from the mains
supply in an emergency. The distance between
the contacts of the emergency switch must be at
least 3 mm.
•
Arrange the mains cable in such a way that it
does not get in contact with any hot components
of the appliance. Do not lead it over sharp edges
or corners.
Connection wiring diagram
Connection wiring diagram
Connection wiring diagram
Connection wiring diagram
Permissible connection methods
Permissible connection methods
Permissible connection methods
Permissible connection methods
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Each connection requires the protective ground of the
mains to be connected to the E
terminal.
NOTE
NOTE
NOTE
NOTE::::
L1, L2, L3 = Phase
N = Neutral
E
= Protective ground
380-415V 3N~ 50Hz
380-415V 2N~ 50Hz
H05 VV-F 5G 1.5mm²
H05 VV-F 4G 1.5mm²
Startup / Operation
Startup / Operation
Startup / Operation
Startup / Operation
Before initial use
Before initial use
Before initial use
Before initial use
•
Clean the oven interior with all therein located
accessories. Follow the instructions that we give
you in the chapter "Cleaning and Maintenance".
•
In order to burn any manufacturing residue, h
the closed oven for approx. 40 minutes at 200°C.
Use the heating function [Upper/lower heat
Then switch to the heating function [Grill] for a
other 20 minutes.
7
Make sure to connect the protective ground to the
the marked terminal block.
The electrical installation of the oven should be
equipped with an emergency switch, which
switches off the whole appliance from the mains
ly in an emergency. The distance between
the contacts of the emergency switch must be at
Arrange the mains cable in such a way that it
does not get in contact with any hot components
of the appliance. Do not lead it over sharp edges
Each connection requires the protective ground of the
terminal.
415V 2N~ 50Hz
F 4G 1.5mm²
Startup / Operation
Startup / Operation
Startup / Operation
Startup / Operation
Clean the oven interior with all therein located
accessories. Follow the instructions that we give
you in the chapter "Cleaning and Maintenance".
order to burn any manufacturing residue, heat
0 minutes at 200°C.
Use the heating function [Upper/lower heating].
Then switch to the heating function [Grill] for an-
NOTE
NOTE
NOTE
NOTE: : : :
The occurring odor and possibly a
development cannot be avoided. Therefore e
sure for a good ventilation of the room during
heating.
Operation
Operation
Operation
Operation
1111 Level regulator of cooking zones
Level regulator of cooking zones
Level regulator of cooking zones
Level regulator of cooking zones
The temperature setting is set for each cooking zone
separately by using the respective level regulator.
= Position of cooking zone
0000 = Off-position
1111 = Lowest setting (keep food warm)
6666 =
=
=
= Highest setting (quick heating a
roasting)
2222 Cooking zone power control lamp
Cooking zone power control lamp
Cooking zone power control lamp
Cooking zone power control lamp
The power control lamp indicates the operation of
cooking zones. It lights up as soon as a cooking zone
is put into operation and goes off if all level regulators
points to the off-position.
3333 Oven function selector switch
Oven function selector switch
Oven function selector switch
Oven function selector switch
The function selector switch is used to set the type of
heating. Rotate the function selector switch until the
icon for the desired type of heating points upwards.
4444 Oven temperature selector switch
Oven temperature selector switch
Oven temperature selector switch
Oven temperature selector switch
The temperature selector switch is used to adjust the
oven temperature. The thermostat allows the te
perature setting from 40°C to 2
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Turn the temperature selector switch only clockwise
and back again. Otherwise the switch will be da
aged.
The occurring odor and possibly a slight smoke
development cannot be avoided. Therefore en-
sure for a good ventilation of the room during
Level regulator of cooking zones
Level regulator of cooking zones
Level regulator of cooking zones
Level regulator of cooking zones
set for each cooking zone
respective level regulator.
= Position of cooking zone
= Lowest setting (keep food warm)
Highest setting (quick heating and cooking,
Cooking zone power control lamp
Cooking zone power control lamp
Cooking zone power control lamp
Cooking zone power control lamp
The power control lamp indicates the operation of the
cooking zones. It lights up as soon as a cooking zone
is put into operation and goes off if all level regulators
Oven function selector switch
Oven function selector switch
Oven function selector switch
Oven function selector switch
The function selector switch is used to set the type of
Rotate the function selector switch until the
icon for the desired type of heating points upwards.
Oven temperature selector switch
Oven temperature selector switch
Oven temperature selector switch
Oven temperature selector switch
The temperature selector switch is used to adjust the
The thermostat allows the tem-
0°C to 240°C.
Turn the temperature selector switch only clockwise
and back again. Otherwise the switch will be dam-
