BOMANN EBO 9612.1 IX, Инструкция по эксплуатации

Страница: 6 / 16

6
Installation Installation Installation Installation
WARNING:
WARNING: WARNING:
WARNING:
The installation and the connection to the main power
may only be performed by an authorized specialist.
CAUTION CAUTION CAUTION CAUTION::::
•
The cabinet, veneers, plastic coatings, used ad-
hesives etc. must be sufficient heat-resistant.
•
The appliance must be installed so that heat can
be dissipated. The ventilation openings must not
be blocked.
•
Do not mount any heat protection strips in order
to ensure an adequate supply of cooling air.
•
Keep a sufficient distance from the rear of the unit
for air circulation.
NOTE
NOTE NOTE
NOTE: : : : R
R R
Recommendation!
ecommendation! ecommendation!
ecommendation!
•
When installing, ask another person to assist.
•
Wear protective gloves to avoid injuries at possi-
ble sharp edges.
•
When carrying the appliance use the hollows at
the housing sides.
Cabinet opening Cabinet opening Cabinet opening Cabinet opening and unit dimension and unit dimension and unit dimension and unit dimension
Prepare the cabinet opening according to the dimen-
sional drawings.
Dimension in mm
Installing the oven
Installing the oven Installing the oven
Installing the oven
•
Put the appliance with the connecting cable first
into the prepared cabinet a bit.
•
Do the connection to the mains supply, see "Elec-
trical connection".
•
Insert the oven into the cabinet opening complete-
ly. Make sure that the cables does not restricted
(bent, squeezed or twisted).
•
Attach and secure the oven by using the supplied
screws on the side walls of the cabinet. The pro-
vided mounting holes (A) are visible after opening
the oven door on the left and right frame.
Electrical connection Electrical connection Electrical connection Electrical connection
Information for the
Information for the Information for the
Information for the authorized expert
authorized expert authorized expert
authorized expert
WARNING: WARNING: WARNING: WARNING:
•
The installation to the mains supply must conform
to the local standards and regulations.
•
Improper connection may cause to an electric
electric electric
electric
shock shock shock shock!
•
Do not change the appliance plug! Let replace the
mains plug by a specialist if this is not suitable for
the appliance plug.
•
Do not use multiple sockets or extension cords.
•
Before connecting, ensure that the power supply
corresponds with the information on the rating la-
bel (unit door frame).
•
Connect the mains cable to a properly installed
and earthed wall outlet.
•
Arrange the mains cable in such a way that it
does not get in contact with any hot components
of the appliance. Do not lead it over sharp edges
or corners.