![BOMANN EBO 9611 IX Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/bomann/ebo-9611-ix/ebo-9611-ix_instruction-manual_2785834011.webp)
•
Remove the rack to the oven centre from the
middle mounting holes.
•
Insert the side racks after cleaning between the
bolts properly again.
Cleaning the glass panel
Cleaning the glass panel
Cleaning the glass panel
Cleaning the glass panel
If necessary, clean the inside of the glass pane
•
Open the oven door.
•
Remove the supports by
loosening the screws lateral-
ly of the supports.
•
Take off the glass carefully forward.
•
Replace the glass panel and fasten the
after you’ve cleaned the glass and dried
oughly.
Reverse the bulb
Reverse the bulb
Reverse the bulb
Reverse the bulb
WARNING:
WARNING:
WARNING:
WARNING:
•
Make sure that the appliance is turned off from
the power supply (fuse).
•
Allow the lamp to cool down before replacing the
bulb. There is risk of burns!
There is risk of burns!
There is risk of burns!
There is risk of burns!
NOTE
NOTE
NOTE
NOTE::::
Use the correct bulb, heat resistant up to 300°
1 x 25
1 x 25
1 x 25
1 x 25 W (type G
W (type G
W (type G
W (type G9)
9)
9)
9)
•
Unscrew the lamp cover anti-clockwise and clean
it with a dry cloth.
•
Change the bulb.
•
Reattach the lamp cover and screw it
tight in a clockwise direction.
•
Check the functionality.
Trou
Trou
Trou
Troubleshooting
bleshooting
bleshooting
bleshooting
Before you contact an
Before you contact an
Before you contact an
Before you contact an authorized
authorized
authorized
authorized specialist
specialist
specialist
specialist
Problem
Problem
Problem
Problem
Possible causes
Possible causes
Possible causes
Possible causes
Appliance
does not
work.
The power supply
is disconnected.
11
Remove the rack to the oven centre from the
Insert the side racks after cleaning between the
inside of the glass panel.
forward.
Replace the glass panel and fasten the supports
ve cleaned the glass and dried it thor-
Make sure that the appliance is turned off from
Allow the lamp to cool down before replacing the
up to 300°C:
clockwise and clean
lamp cover and screw it
specialist
specialist
specialist
specialist
What to do
What to do
What to do
What to do
Check the fuse
of your domestic
wiring system.
Problem
Problem
Problem
Problem
Possible causes
Possible causes
Possible causes
Possible causes
The oven
lamp does
not work.
The bulb is defe
tive, has been
inserted incorrectly
or not firmly.
NOTE:
NOTE:
NOTE:
NOTE:
If a problem still persists after following the steps
above, contact your distributor or an authorized tec
nician.
Possible causes
Possible causes
Possible causes
Possible causes
What to do
What to do
What to do
What to do
The bulb is defec-
has been
inserted incorrectly
Check the bulb,
see “Reverse
the bulb”.
If a problem still persists after following the steps
above, contact your distributor or an authorized tech-