Installing the hob
Installing the hob
Installing the hob
Installing the hob
A
AA
A
B
BB
B
C
C
C
C
Screw
Bracket
Drilling
TTTT
Bracket position
1111
Bracket position
Worktop
•
First check the factory fitted hob seal at the hob
frame to the integrity and the proper fit.
•
Put the hob with the connecting cable first and
with the control panel to the front into the pr
pared cutout.
•
Make sure that the distances to the cutting are
equal on all four sides and that the seal is resting
on the worktop.
•
Fix the hob in accordance with the worktop thic
ness by attaching the enclosed brackets from b
low to the drillings provided in the
tening them with the screws.
Electrical connection
Electrical connection
Electrical connection
Electrical connection
Information for the authorized expert
Information for the authorized expert
Information for the authorized expert
Information for the authorized expert
WARNING:
WARNING:
WARNING:
WARNING:
•
The installation to the mains supply must conform
to the local standards and regulations.
•
Connecting the appliance to a domestic power
socket or using multiple sockets or extension c
bles is not permitted.
•
Improper connection may cause to an
shock
shock
shock
shock!
•
Before connecting, ensure that the power supply
corresponds with the information on the rating l
bel (appliance underside) and the wiring
7
D
D
D
D
Hob bottom
Bracket position
2222
First check the factory fitted hob seal at the hob
frame to the integrity and the proper fit.
Put the hob with the connecting cable first and
with the control panel to the front into the pre-
Make sure that the distances to the cutting are
equal on all four sides and that the seal is resting
Fix the hob in accordance with the worktop thick-
ness by attaching the enclosed brackets from be-
low to the drillings provided in the hob and fas-
Information for the authorized expert
Information for the authorized expert
Information for the authorized expert
Information for the authorized expert
The installation to the mains supply must conform
to the local standards and regulations.
Connecting the appliance to a domestic power
or using multiple sockets or extension ca-
Improper connection may cause to an electric
electric
electric
electric
Before connecting, ensure that the power supply
corresponds with the information on the rating la-
and the wiring diagram.
•
The appliance is suitable for three
current (220-240/380-415V
•
Fix the mains cable in the tension relief.
•
The electrical installation of the oven
equipped with an emergency
switches off the whole appliance from the mains
supply in an emergency. The distance between
the contacts of the emergency
least 3 mm.
•
Arrange the mains cable in such a way that it
does not get in contact with any hot compo
of the appliance. Do not lead it over sharp edges
or corners.
Connection wiring diagram
Connection wiring diagram
Connection wiring diagram
Connection wiring diagram
Permissible connection methods
Permissible connection methods
Permissible connection methods
Permissible connection methods
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Each connection requires the protective ground of the
mains to be connected to the PE
PE
PE
PE
NOTE
NOTE
NOTE
NOTE::::
L1, L2: Phase – N: Neutral – PE
Startup / Operation
Startup / Operation
Startup / Operation
Startup / Operation
Selecting the cookware
Selecting the cookware
Selecting the cookware
Selecting the cookware
CAUTIO
CAUTIO
CAUTIO
CAUTION
N
N
N::::
The cooking surface and the base of the cookware
must always be clean and dry.
When choosing the cookware, pay attention to the
following
The appliance is suitable for three-phase and AC
415V 3N~ 50/60Hz
).
Fix the mains cable in the tension relief.
The electrical installation of the oven should be
equipped with an emergency switch, which
switches off the whole appliance from the mains
supply in an emergency. The distance between
the contacts of the emergency switch must be at
Arrange the mains cable in such a way that it
does not get in contact with any hot components
of the appliance. Do not lead it over sharp edges
Permissible connection methods
Permissible connection methods
Permissible connection methods
Permissible connection methods
Each connection requires the protective ground of the
PE
PE
PE
PE
terminal.
PE
: Protective ground
Startup / Operation
Startup / Operation
Startup / Operation
Startup / Operation
The cooking surface and the base of the cookware
must always be clean and dry.
When choosing the cookware, pay attention to the
