Appliance Equipment
Appliance Equipment
Appliance Equipment
Appliance Equipment
Hob
Hob
Hob
Hob arrangement
arrangement
arrangement
arrangement
NOTE
NOTE
NOTE
NOTE::::
The listed power settings can vary depending on the
material and/or size of the cookware.
1111
Control panel
2222
Ø 13.5 cm / 1000 W
Ø 23 cm / 2200 W
3333
Ø 16.5 c
4444
Ø 16.5 cm / 1100 W
27 x 16.5 cm / 2000 W
5555
Ø 16.5 c
Delivery
Delivery
Delivery
Delivery scope
scope
scope
scope
Installation material:
4x mounting bracket
4x fixing screw
Installation
Installation
Installation
Installation
WARNING:
WARNING:
WARNING:
WARNING:
The installation and the connection to the main power
may only be performed by an authorized specialist.
CAUTION
CAUTION
CAUTION
CAUTION::::
•
The worktop, the cabinet, veneers
ings, used adhesives etc. must be sufficient
resistant.
•
The appliance must be installed so that heat can
be dissipated. The ventilation openings (D) and
(E) must not be blocked.
•
The distance between the hob and an extractor
hood must be at least as large as specified in the
instructions of the extractor hood!
•
Below the cutout must remain a minimum di
tance. In this area are not allowed heat
objects (cabinet, drawer, etc.). Possibly existing
sidewalls or drawer boxes must be sawed accor
ingly or removed.
6
Appliance Equipment
Appliance Equipment
Appliance Equipment
Appliance Equipment
The listed power settings can vary depending on the
.
Control panel
13.5 cm / 1000 W
23 cm / 2200 W
cm / 1200 W
16.5 cm / 1100 W
27 x 16.5 cm / 2000 W
cm / 1200 W
mounting bracket,
and the connection to the main power
may only be performed by an authorized specialist.
, the cabinet, veneers, plastic coat-
adhesives etc. must be sufficient heat-
must be installed so that heat can
sipated. The ventilation openings (D) and
The distance between the hob and an extractor
large as specified in the
instructions of the extractor hood!
Below the cutout must remain a minimum dis-
tance. In this area are not allowed heat-sensitive
objects (cabinet, drawer, etc.). Possibly existing
sidewalls or drawer boxes must be sawed accord-
•
Keep safety distances; sufficient air circulation
must be ensured:
Preparing the worktop for installation of the hob
Preparing the worktop for installation of the hob
Preparing the worktop for installation of the hob
Preparing the worktop for installation of the hob
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Before cutting secure the outer cutout edge with wide
adhesive tape to avoid traces of jigsaw on the wor
top.
•
The worktop must have a thickness
30 mm, it must be leveled horizontally and are
sealed to the wall side against overflowing liquids
or moisture.
•
The hob must be completely surrounded by min.
50 mm work surface.
•
The cut surfaces (cutout edges) must be sealed
with special varnish, silicone rubber or cast raisin
in order to prevent swelling
•
Clean and dry the worktop in the cutout area
thoroughly.
Worktop cutout
Worktop cutout
Worktop cutout
Worktop cutout
Prepare the cutout of the worktop according to the
dimensional drawing.
Dimensions in mm
LLLL
W
W
W
W
H
H
H
H
D
D
D
D
590
520
55
51
S
S
S
S Seal below the hob
Keep safety distances; sufficient air circulation
A
AA
A 760 mm
B
BB
B 50 mm
C
C
C
C 20 mm (min)
D
D
D
D Air intake 30 mm
E
EE
E Air outlet 5 mm
Preparing the worktop for installation of the hob
Preparing the worktop for installation of the hob
Preparing the worktop for installation of the hob
Preparing the worktop for installation of the hob
outer cutout edge with wide
adhesive tape to avoid traces of jigsaw on the work-
The worktop must have a thickness of minimum
, it must be leveled horizontally and are
sealed to the wall side against overflowing liquids
completely surrounded by min.
The cut surfaces (cutout edges) must be sealed
with special varnish, silicone rubber or cast raisin
in order to prevent swelling caused by humidity.
Clean and dry the worktop in the cutout area
Prepare the cutout of the worktop according to the
A
AA
A
B
BB
B
X
XX
X
560
490
50
Seal below the hob
