BOMANN 779061, Инструкция по эксплуатации

Страница: 35 / 40

35
Troubleshooting
Before you contact an authorized specialist
Problem Possible cause / Action
Unit does not
work
Check the power supply.
Oven lamp
does not
work Bulb is defective, was inserted in-
correctly, is not securely seated in
the socket, see
“Reverse the
bulb”.
Strong
smoke deve-
lopment
Grease residues in the oven
chamber, switch off the oven, al-
low to cool before cleaning.
NOTE:
If a problem persists after following the steps above,
contact your distributor or an authorized technician.
Technical Data
Electrical connection…………………………...………..
Connection voltage: ……………….220-240 V~ 50 Hz
Rated power: ………..……………..…..…........2400 W
Rated current: ………………......………......……..16 A
Protection class: ………………………...………I / IP20
Dimension H x W x D / Weight……...……..…………..
Oven: ……………………….…...59.5 x 59.5 x 56.5 cm
Cut-out_lower cabinet: …..60.0 x 56.0 x min. 55.0 cm
Cut-out_tall cabinet: …......59.0 x 56.0 x min. 55.0 cm
Net weight: ………………….…….......………...28.7 kg
Available accessories……………………………………
Telescopic runner set: …………..…Art. no. 8 979 060
………………………………………………
(
not supplied)
The right to make technical and design modifications
during continuous product development remains re-
served.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
Disposal
Meaning of the “Dustbin” Symbol
Protect our environment; do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will
no longer use to the collection points provided for
their disposal.
This helps avoid the potential effects of incorrect dis-
posal on the environment and human health.
This will contribute to the recycling and other forms of
reutilization of electrical and electronic equipment.
Information concerning where the equipment can be
disposed of can be obtained from your local author-
ity. Your dealer and contractual partner is also
obliged to take back the old appliance free of charge.
WARNING:
Remove or disable any existing snap and bolt locks if
you take the unit out of operation or dispose it.
Information to professional users for disassembly
(acc. VO (EU) No. 66/2014 appendix I, No. 2)
Information for non-destructive disassembly for
maintenance purposes

Remove the lamp as described in the manual.

For maintenance purposes, the oven door can be
unhinged out and reinstalled, for the procedure
please refer to the manual.

A further disassembly for maintenance purposes
is not provided.

If you would like to exchange defective compo-
nents, please contact our customer service.