BOMANN 774160, Инструкция по эксплуатации

Страница: 16 / 24

16
Control panel
1
Power: button to turn on/off the power supply.
2 Program: program selection button.
3 Delay: button to select the start delay of 3, 6,
or 9 hours. Select the operating conditions and
close the device door. The device starts automati-
cally after the selected time has elapsed.
4 The control lamps indicate the program selection.
5
The control lamps indicate the start delay selec-
tion.
6 Control lamp: lights up when rinse aid must be
added.
Control lamp: lights up, when dishwasher salt
needs refilling.
Starting a program

The water supply must be opened to the maxi-
mum pressure.

Load the dishwasher baskets.

Fill in the detergent.

Turn on the appliance.

Set the required program options.

Start the operation by closing the appliance door.
Changing the program
CAUTION:
A program change should be done only a short time
after starting the program. Otherwise, maybe deter-
gent has been released and already drained rinse
water.

To make a program change, carefully open the
appliance door so that you can operate the control
panel.

Press the Program selection button for more than
3 seconds.

Select a new program and close the appliance
door.
Forgot to add a dish?
WARNING:
Open the door very carefully during operation, there
is a risk of water squirting out.
Dishware can be added any time before the deter-
gent dispenser opens.

Carefully open the appliance door a little. Once
the spray arms stop working, you can fully open
the door.

Add forgotten dishware.

Close the appliance door, the operation will con-
tinue after approx. 10 seconds.