Bomag BW 100 ACM-5, Руководство по эксплуатации

Страница: 49 / 176

Safety regulations
BOMAG 49 BW 80 AD-5 Fam.
Install the tires only if are sufficiently experienced and with the right tools at
hand. If necessary have the tires assembled in a qualified workshop.
Always ensure the correct tire pressure and do not exceed the specified max-
imum pressure.
Check tires and wheels every day for pressure, cuts, bulges, damaged rims,
missing wheel studs or nuts. Do not drive with damaged tires or wheels.
Ant-sticking emulsions for tires must only consist of water and anti-sticking
agent, in a concentration in accordance with the specifications of the manufac-
turer of the anti-sticking agent. Observe applicable environmental regulations.
Cleaning work
Do not perform cleaning work while the motor is running.
Do not use gasoline or other easily inflammable substances for cleaning.
When cleaning with steam cleaning equipment do not subject electrical parts
and insulation material to the direct jet of water, or cover it beforehand.
l
Do not guide the water jet into the exhaust and into the air filter.
After maintenance work
After all maintenance work is completed reinstall all guards and safety instal-
lations.
Repair
Mark a defective machine by attaching a warning tag to the steering wheel.
Repair work must only be performed by qualified and authorized persons. Use
our repair instructions for this work.
Exhaust gases are highly dangerous! Always ensure an adequate supply of
fresh air when starting in closed rooms!
Test
The safety of compaction equipment must be checked by a specialist as re-
quired in dependence on the application and the operating conditions, howev-
er at least once every year.
Information and safety stickers/decals on the machine
Keep stickers/decals in good and legible condition (see spare parts catalogue)
and comply with their meaning.