manualshive.com logo in svg

Bomag BPR 70/70 D, Инструкция по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Bomag BPR 70/70 D Скачать руководство пользователя страница 58

1.

CAUTION!
Danger of injury caused by the crushing

of body parts!

–

When reversing, steer the machine from

the side using the steering handle.

Shift the lower part of the travel lever forward until the

desired speed has been reached.

ð

The machine vibrates backwards with the adjusted

speed.

2.

Release the travel lever.

ð

The travel lever moves back to middle position. The

machine drives backwards with the adjusted speed.

1.

Move and hold the travel lever in the opposite direction until

the machine vibrates on the spot.

ð

The machine stops and vibrates on the spot.

1.

Park the machine in secured condition

 

Ä

 Chapter 6.5

„Parking the machine in secured condition“ on page 60

.

2.

Lift the machine, using suitable lifting and lashing tackle at

the intended lifting points, until it becomes free

 

Ä

 Chapter 7

„Loading / transporting the machine“ on page 63

.

Driving backwards

Fig.  47

Vibration on the spot

Fig.  48

Help if the machine gets stuck

Operation – Operation

 

BPR 70/70 D

 

58

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Содержание BPR 70/70 D




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды