BG590-K2
7
2.7 T
rigger
M
odes
There are 3 trigger modes for the cameras.
PIR trigger:
PIR trigger is constantly working
when the camera is on. The camera takes
photos/videos only when motion is detected.
Time lapse:
The time lapse default setting is OFF
by default. If the timer trigger interval is manually
set to a non-zero value, the cameras start to work at
a preset interval.
PIR & Timer trigger:
If you want both PIR
trigger and time lapse, you need to set PIR
trigger to
“
normal, high or low
”
sensitivities
according to the external environments. Be sure to
also set the time lapse to a desired non-zero value.
The cameras will capture pictures or videos in
preset time intervals even if there is no motion
detected, and will capture pictures and videos when
motion is detected.
*Time Lapse and PIR Trigger cannot be set to off at the same time.
Additional PIR settings to note:
PIR Interval
This setting indicates how long the PIR sensor will
be disabled after each camera triggering. During
this time the PIR sensor will not react to any
detected motion.