15
should stop machine immediate to check it for keeping accurate
performance.
(3) Keep work area clean, release vise, cutter and work-piece from table,
turn off power source, take chip or dust away from machine. Fill the
lubricant and coating, antirust oil before leaving according to the
manual.
12.2Weekly maintenance
(1) Clean and coat the cross, longitudinal and vertical screw with oil.
(2) Check to see if sliding rotation and surface is lack of lubricant. If it’s
not enough, please fill it.
12.3Mouthly maintenance
(1) Adjust the gab of every feed gab strip.
(2) Lubricate worm gear, worm shaft and bearing to avoid wear.
12.4Yearly maintenance
(1) Adjust table to horizontal position for guarantee accuracy.
(2) Check electric cord, plugs and switches to avoid loosing or wearing.
13. Trouble shooting
13.1The spindle don’t revolve after putting through the power source
(1) The voltage is wrong and the main switch is cut off. — to adjust the
enter voltage, turn on the main switch.
