Bolton Tools BS-128DR, Руководство по эксплуатации

Страница: 6 / 15

Mild steel, hard brass
or bronze
36 28 Medium Medium
Aluminum plastic 60 50 Large Small
BLADE DIRECTION
OF TRAVEL
Be sure the blade is assembled to the pulleys such that the vertical edge
engages the work piece first.
STARTING SAW
Switch button function description (FOR CE ONLY)
CAUTION: NEVER OPERATE SAW WITHOUT BLADE GUARDS IN
PLACE.
Be sure the blade is not in contact with the work when the motor is started.
Start the motor, allow the saw to come to full speed, then begin the cut by
left the head down slowly onto the work. DO NOT DROP OR FOR. Let the
weight of the saw head provide the cutting force. The saw automatically
shuts off the end of the cut.
BLADE SELECTION
A 8-tooth per inch, general-use blade is furnished with this metal cutting
band saw. Additional blades in 4,6,8 and 10 tooth sizes are available. The
choice of the blade pitch is governed by the thickness of the work to be cut;
the thinner the workpiece, the more teeth advised. A minimum of three
teeth should engage the workpiece at all times for proper cutting. If the
teeth of the blade are so far apart that they straddle the work, severe
damage to the workpiece and to the blade can result.
CHANGING BLADE
Raise saw head to vertical position and open the blade guards. Loosen
tension screw knob sufficiently to allow the saw blade to slip off the wheels.
Install the new blade with teeth slanting toward the motor as follows:
1. Place the blade in between each of the guide bearings.
2. Slip the blade around the motor pulley (bottom) with the left hand and
hold in position.
3. Hold the blade taut against the motor pulley by pulling the blade
upward with the right hang which is placed at the top of the blade.